Home

How Do You Clean Up Safely After Frying Fish?

To clean up safely after frying fish, turn off the heat, leave the oil undisturbed until it cools, and refrigerate leftovers promptly. Then collect the oil without pouring it down a drain, wash greasy cookware, and clean any surfaces or utensils that touched raw fish.

Turn off the heat and let the oil cool

Turn off the burner or fryer as soon as you finish cooking. Unplug a countertop fryer if you can reach its plug safely without leaning over hot oil, and keep children and pets away while the equipment cools.

Leave the pan securely on the turned-off burner, with its handle turned inward and away from other hot burners. Don't carry a pan of hot oil to the sink, pour it into a container, or add water to cool it. Oil can remain hot enough to burn you long after it stops bubbling. Cooling time varies with the pan and the amount of oil.

If oil catches fire, never use water. For a small fire confined to a pan, slide a metal lid or baking sheet over it and turn off the heat if you can do so safely, following guidance from the U.S. Fire Administration. Don't move the pan or lift the cover until it has cooled. If the fire spreads or you can't cover it safely, leave and call emergency services.

Refrigerate leftover fish promptly

Don't wait for the oil or kitchen to cool before refrigerating cooked fish. Transfer leftovers to shallow containers and put them in the refrigerator promptly rather than leaving a large pile on the serving plate.

Refrigerate perishable leftovers within two hours, or within one hour if the surrounding temperature exceeds 90°F (32°C), according to the USDA Food Safety and Inspection Service. Use refrigerated cooked fish within three to four days, or freeze it for longer storage.

Discard scraps from plates and set aside dirty serving utensils. Keep these separate from the containers, lids and utensils you'll use to store or reheat the fish.

How to strain or dispose of frying oil

Wait until the oil and cookware have cooled before pouring out the oil. Place a stable container on a tray to catch any drips and keep them off the countertop.

  • If you plan to reuse the oil, strain it through a fine sieve or suitable filter into a clean, dry, sealable container.
  • Label the oil with the date and note that you used it for fish, since the flavor may transfer to other foods.
  • Discard oil that smells rancid, has become unusually thick, foams persistently during frying, or smokes at your normal frying temperature.
  • To dispose of the oil, pour it into a leakproof, nonbreakable container and close it securely.

You can't judge whether frying oil is still usable by counting how many times you've used it. Its condition depends on the frying temperature, cooking time, food particles and storage. Keep strained oil tightly covered, away from heat and light, and discard it if you're unsure of its condition.

Never pour oil down drains or into the toilet, even with hot water or dish soap. Check your local waste service's rules for cooking-oil collection or disposal. Some services accept sealed containers with household trash, while others require separate collection.

How to wash pans and fryer parts safely

Once you've removed the cooled oil, scrape loose crumbs into the trash and wipe out the remaining grease with paper towels. Removing this residue first reduces the amount of fat entering your plumbing and makes washing easier.

  1. Wash removable, washable parts with warm water, dish soap and a nonabrasive sponge.
  2. Soak stubborn bits of batter if the cookware manufacturer's instructions allow it, then loosen them with a suitable brush or scraper.
  3. Rinse thoroughly and dry each part before putting it away or reassembling the fryer.

Never immerse electrical components, including a fryer's control unit, cord or plug. Wipe the exterior only as the manufacturer directs. Check the instructions before putting baskets, lids or other removable parts in a dishwasher.

Don't pour cold water into a hot pan. The sudden temperature change can damage cookware and produce steam or splashes. If you use cast iron, wash it without prolonged soaking, dry it promptly and apply a thin coating of oil if needed.

How to clean surfaces that touched raw fish

Wash your hands with soap and running water after touching raw fish, its packaging or contaminated utensils. Clean faucet handles, cupboard handles and seasoning containers you touched during preparation, not just the visible splashes around the stove.

Wash cutting boards, knives and countertops with hot, soapy water. The Centers for Disease Control and Prevention recommends washing utensils, cutting boards and countertops after preparing each food, particularly raw meat, poultry, seafood and eggs.

If you sanitize a food-contact surface afterward, clean before sanitizing and use a product approved for that surface. Follow its label for dilution, contact time and any required rinsing. Never mix cleaning products, especially bleach with ammonia or acids.

How to remove grease and fish smells

Once the stove is cool, wipe grease from the stovetop, backsplash and nearby surfaces with a cleaner suitable for each material. Where practical, apply cleaner to a cloth rather than spraying it into burner openings, controls or electrical fittings.

Keep the exhaust fan running during cleanup and ventilate the kitchen if you can do so safely. Wash the fan's grease filters according to the manufacturer's instructions. Trapped oily residue can keep releasing odors after you've cleaned the cookware.

Bag fish scraps, used filters and cool, greasy paper towels, then take the bag out of the kitchen trash can. Empty the sink strainer into the trash, wash the strainer and sink, and replace or launder greasy cloths. Removing the residue works better than masking it with fragrances.

Sources